Hydroscand’s Cross Over Fittings are suitable for both spiral and braided hoses. They are recommended for a wide range of fluids such as hydraulic oil, solvents, gases, water cleaning equipment etc. All fittings are manufactured in one piece except for the compact bend which are soldered.

There are three types of nuts on the Hydroscand fittings, they can be recognised by the different suffixes in their part numbers:

The part number has no suffix =
The fitting is delivered with a crimped nut.
The part number has suffix 1 =
The fitting is delivered with a thrust wire nut.
The part number has suffix 2 =
The fitting is delivered with a slip-on nut which is kept in place with a plastic washer.
Please note that the working pressure is reduced for Deltaflex and Gammaflex and IsoBar 350.

The following working pressures are recommended:




Working Pressure in MPa
1 MPa = 10 Bar = 145 psi

Temperature range
NBR -40°C to +120°C
Viton -25°C to +200°C

For heavy duty applications with Deltaflex or Gammaflex and IsoBar 350 we recommend our Interlock series (4400).

A correct assembly makes a safe unit. Always follow the assembling instruction.