Egeflex 2 PO
100
Cold and oil resistant rubber
Cold, weather and oil resistant rubber
-50
+100
Oil
Two braids of steel wire
1:4
A hose for applications with medium to high pressures. The hose is made to be used in arctic environments. Excellent flexibility throughout the whole temperature range. Equivalent to EN 853 2SN (41.5–8.0 MPa). Other dimensions then the ones listed below are available upon request.
4200-12-xx, 4200-32-xx
Other
Part No. | ID mm | ID inch | OD mm | Bend rad mm | WP MPa | Weight kg/m |
---|---|---|---|---|---|---|
11024404 | 6,50 | 1/4" | 15 | 100 | 40 | 0.33 |
11024406 | 10 | 3/8" | 19 | 130 | 33 | 0.5 |
11024408 | 13 | 1/2" | 22.2 | 180 | 27,50 | 0.59 |
ASSEMBLY INSTRUCTIONS FOR REUSABLE FITTINGS WITH NON-SKIVE FERRULES ON HIGH PRESSURE HOSES EN 853 1SN AND EN 853 2SN
1. Cut the hose transversely. Secure the fitting ferrule in a vice. Make sure you are using the right ferrule, with one or two rings around the neck. One ring for 1SN-hoses and two rings for 2SN-hoses.
2. Screw the hose on the ferrule until it stops. The fitting ferrule has left-handed threads.
3. Lubricate the hose and the insert. Place the ferrule in the vice. Insert the nipple so far that the hexagonal meets the ferrule.
|