EGEFLEX 2XA
100
Synthetic oil resistant rubber
Synthetic, oil resistant rubber with extra abrasion resistant polymer coating
-40
+100
Oil
Two braids of steel wire
4:1
This hose is well suited when high pressures are required. The external polymer rubber has low friction and extra abrasion resistance. Working pressure exceeds or is equivalent to EN 853 2SN (8,0-12,5MPA).
Smooth, black with white and purple labels
4200-12-xx, 4200-23-xx
Other
Part No. | ID mm | ID inch | OD mm | Bend rad mm | WP MPa | Weight kg/m |
---|---|---|---|---|---|---|
11022320 | 32 | 1 1/4" | 48.3 | 420 | 12,50 | 2.04 |
11022324 | 38 | 1 1/2" | 54.6 | 500 | 9 | 2.27 |
11022332 | 51 | 2" | 67 | 630 | 8 | 2.87 |
ASSEMBLY INSTRUCTIONS FOR REUSABLE FITTINGS WITH NON-SKIVE FERRULES ON HIGH PRESSURE HOSES EN 853 1SN AND EN 853 2SN
1. Cut the hose transversely. Secure the fitting ferrule in a vice. Make sure you are using the right ferrule, with one or two rings around the neck. One ring for 1SN-hoses and two rings for 2SN-hoses.
2. Screw the hose on the ferrule until it stops. The fitting ferrule has left-handed threads.
3. Lubricate the hose and the insert. Place the ferrule in the vice. Insert the nipple so far that the hexagonal meets the ferrule.
|