Egeflex 1 CO
100
Synthetic oil resistant rubber
Weather and oil resistant rubber
-40
+100
Oil
One braid of steel wire
1:4
Ozone resistant hose for applications with medium/high pressures and much external abrasion. Equivalent to EN 853 1SN (25.0–4.0 MPa). The hose is approved by MSHA (flame resistant).
Part numbers ending in -30 are supplied on a reel. Joints can occur, maximum 4 lengths/bobbin and a minimum length of 5 meters per length.
4200-11-xx, 4200-21-xx (3/16"–1"), 4200-23-xx (1"–2")
Other
Material Codes
Part No. | ID mm | ID inch | OD mm | Bend rad mm | Max length | WP MPa | Length min. | Weight kg/m |
---|---|---|---|---|---|---|---|---|
11011403 | 5 | 3/16" | 11.8 | 90 | - | 25 | - | 0.19 |
11011404 | 6,50 | 1/4" | 12,3 | 100 | - | 22,50 | - | 0.21 |
11011405 | 8 | 5/16" | 15 | 115 | - | 21,50 | - | 0.24 |
11011406 | 10 | 3/8" | 17.4 | 125 | - | 18 | - | 0.33 |
11011408 | 13 | 1/2" | 20.6 | 180 | - | 16 | - | 0.41 |
11011410 | 16 | 5/8" | 23.7 | 200 | - | 13 | - | 0.45 |
11011412 | 19 | 3/4" | 27.7 | 240 | - | 10,50 | - | 0.58 |
11011416 | 25 | 1" | 35.6 | 300 | - | 8,80 | - | 0.88 |
11011420 | 32 | 1 1/4" | 43.5 | 420 | - | 6,30 | - | 1.23 |
11011424 | 38 | 1 1/2" | 50.6 | 500 | - | 5 | - | 1.51 |
11011432 | 51 | 2" | 64 | 630 | - | 4 | - | 1.97 |
1101140430 | 6,50 | 1/4" | 13,4 | 100 | 260 | 22,50 | 160 | 0,21 |
1101140630 | 10 | 3/8" | 17,4 | 125 | 160 | 18 | 100 | 0,33 |
1101140830 | 13 | 1/2" | 20,6 | 180 | 110 | 16 | 70 | 0,41 |
ASSEMBLY INSTRUCTIONS FOR REUSABLE FITTINGS WITH NON-SKIVE FERRULES ON HIGH PRESSURE HOSES EN 853 1SN AND EN 853 2SN
1. Cut the hose transversely. Secure the fitting ferrule in a vice. Make sure you are using the right ferrule, with one or two rings around the neck. One ring for 1SN-hoses and two rings for 2SN-hoses.
2. Screw the hose on the ferrule until it stops. The fitting ferrule has left-handed threads.
3. Lubricate the hose and the insert. Place the ferrule in the vice. Insert the nipple so far that the hexagonal meets the ferrule.
|